Safety Gear
Welding Tips
Welding Tools
Welding Tools
Do Welding Rods Expire? (Explained!)
YES! Welding rods like any other equipment have an expiration date. Different electrodes are used for several welding techniques, but not all of them have the same shelf life.
What Size Wire Do You Need for a Welder?
The most common sizes of welding wire are 0.023, 0.030, 0.035, and 0.045 inches in diameter. The larger the diameter of the welding wire, the more amperage it can handle, and the more heat it can produce.
Difference Between a Single Phase and Three Phase Welder
Single phase is used in places where less power is required. When a large amount of power is required, three phases are used in large industries and factories.
Welding Tips
Is it Bad to Get a Sunburn from Welding?
Welding sunburn can be painful and can have long term effects on your health. And constant exposure to harmful UV rays and heat from welding can result in fatal consequences.
Transformer vs Inverter Welding Machine Comparison
In comparison to transformer welders, inverter-based technology is very light. The main distinction is that an inverter welding machine is much more efficient and lighter.
10 Advantages And 8 Disadvantages Of Friction Welding
The fundamental benefit of friction welding is the ease with which the joining may be accomplished. It is an environmentally benign method that produces no smoke!
Safety Gear
Do Auto Darkening Welding Helmets have Batteries?
Batteries are found in almost all auto-darkening welding helmets. Some are entirely powered by solar energy. However, you must be outside on a sunny day...
Is it Safe to Weld in Jeans? (7 Reasons)
Welders wear jeans because they are made of denim, a tightly woven cotton fabric that does not burn easily. For welding, fire retardant jeans is considered one of the safest options.
Sensitivity Setting of an Auto-darkening Welding Helmet (Explained!)
The sensitivity setting in the auto-darkening welding helmet allows the user to determine what intensity of light triggers the panels.
MIG Welding
Best 220V MIG Welders for Beginners
We looked and tested MIG 220 V welders to save you some time and some money when searching for your next welder. It offers a great deal of function and versatility when working with multiple materials.
MIG Vs Stick Welding – Which Is Better?
MIG welding is better for welding thin materials as it uses a wire electrode that continuously feeds into the weld joint. Stick welding is better for thicker materials and works well on rusty, or painted surfaces.
Is MIG Welding Safer than Stick Welding?
MIG is comparatively safer than stick, however, it does not mean you're completely safe using MIG welding technique. If you're careless, even MIG might prove to be hazardous.
TIG Welding
Difference Between a MIG and TIG Welding Machine?
The fundamental distinction between MIG and TIG welding is the electrode that is used to generate the arc. Let us understand the difference...
What Do I Need for TIG Welding?
Since the arc is produced between the end of a small diameter tungsten electrode and the workpiece in TIG welding, you will need a power supply, a torch, an electrode of your choosing and protective equipment.
Can You TIG Weld Steel With 100% Argon?
TIG welding requires a shielding gas that is completely inert at welding temperatures, and pure Argon meets that requirement. Argon is used in the purging process, which is essential for TIG welding stainless steel.
Stick Welding
Does a Stick Welder Need Gas?
Stick welding has certain distinct advantages. It is extremely adaptable, does not require the use of shielding gas, and is simple to conduct in windy and outdoor settings.
MIG Vs Stick Welding – Which Is Better?
MIG welding is better for welding thin materials as it uses a wire electrode that continuously feeds into the weld joint. Stick welding is better for thicker materials and works well on rusty, or painted surfaces.
Is MIG Welding Safer than Stick Welding?
MIG is comparatively safer than stick, however, it does not mean you're completely safe using MIG welding technique. If you're careless, even MIG might prove to be hazardous.
